Camshafts 245 742 45
Bounty: $6.00
Posted By: HelpIdentify
I'd Like to Know:
I would like to know what year make and model these will fit
Opinions
You need to measure the lobe height to determine which pair this really is as the castings were used for two different versions of the engine. They are either 1995 2.3L Vin-D Quad-4 cams with .360" lobe height, or 96+ 2.4L Vin-T Quad-4 cams with .3540"Intake, .3450"Exhaust lobe heights. The intake cam is the one with the hex drive in the back end of it. The 'Quad-4' engine was used in many GM cars across all brands in these years.
References:
no link, just stuff I know
By: coreguys Submitted on: 07/12/2016 at 07:52PMReason: The lobe height of these is 1.752" Does this help?
look at the picture on the link page, it should show you how to do the math on the lobe measurements I described before.
References:
http://constructionearthmover.tpub.com/TM-5-3805-260-24/css/TM-5-3805-260-24_...
By: coreguys Submitted on: 08/05/2016 at 07:33PMReason: Will provide measurements in the future.